Temperature measurement, surface temperature, intelligent pyrometer

Temperature measurement of PCBs

High quality PCBs with SMD components are repaired in rework stations. Hot air is used to remove any defective components and residual solder, to perform solder paste printing and to solder new components ...

詳細を表示する

Non-contact IR temperature measurement of plastic film

Non-contact temperature measurement of thin plastic films is in practice a difficult measurement task. Depending on the type of plastic, the measurement must be performed in different spectral ranges. ...

詳細を表示する

Measuring of the haptic contact temperature

Contact or touch temperature is an important parameter in the tactile quality of a surface. The feeling of the temperature that a material causes can be determined by using a measuring system. If this ...

詳細を表示する

射出成形アプリケーションでの温度測定

射出成形機械でプラスチック加工を行う方なら誰もが、とりわけ自動車業界において、エンドユーザーからの品質要求がますます高まっている状況に直面しています。このような市場トレンドから、射出直後でのオンラインによる温度モニタリングも、グローバルな品質特性として重要性を増しています。

詳細を表示する

Brake disc temperature measurement for Formula Student

In the optimisation of braking systems for the High Octane Motorsports e.V. racing car at the University Erlangen-Nürnberg, the temperature rise of the brake disc needs to be measured during on-road testing.

詳細を表示する

Temperature measurement for vacuum mold equipment

Thermal vacuum mold equipment is used for the decentralised manufacture of mouth guards for teeth. A special film is heated for this and drawn into a shape using a vacuum. The temperature is measured ...

詳細を表示する

Casting - temperature measurement

The measurement and the documentation of the production parameters in foundries are playing more and more important roles for the compliance with the quality requirements. Particular attention must be ...

詳細を表示する

高周波焼入れでの温度測定

高周波焼入れでは応力が発生することがあり、焼戻し温度に再加熱することで解消できるものの、この場合の作業温度範囲は硬化時より狭くなります。安全距離を保ったまま非接触で温度測定が行えるマイクロエプシロン製パイロメーターは、赤熱の対象物の波長測定向けに特化しています。

詳細を表示する

Film extrusion - temperature measurement

Infrared temperature sensors from Micro-Epsilon measure the film temperature before the three-roller mill. An optimal regulation of the process temperatures is made possible due to the precise temperature ...

詳細を表示する

Iron and steel molten mass - temperature measurement

Infrared temperature sensors from Micro-Epsilon measure the temperature of the molten mass in casting plants immediately before filling the moulds. The temperature values are used for monitoring the specified ...

詳細を表示する

Bolts – temperature measurement

Bolts are preheated to 400 °C - 500 °C in order to be pressed easily by the die. Micro-Epsilon pyrometers are used to measure the temperature. Maintenance of the optimum preheating temperature is important ...

詳細を表示する

Glass industry / glass - temperature measurement

Temperature plays an important role in the glass industry for many manufacturing and production processes. It is a matter of obtaining precise temperature measurements of transparent (glass) and non-transparent ...

詳細を表示する

Asphalt mixing systems - temperature measurement

For temperature measurements in asphalt mixing systems, both the temperature of the mineral discharge and the temperature after mixing are measured. Infrared sensors from Micro-Epsilon are used for this ...

詳細を表示する

Building materials – temperature measurement

Micro-Epsilon temperature sensors are always used for the manufacture of construction materials when the monitoring and control of the temperature are critical for the product quality and productivity. ...

詳細を表示する

Glass machining – temperature measurement

In order to be able to bend and shape flat glass, the exact glass surface temperature must be taken into account. Special pyrometers from Micro-Epsilon have been developed for measuring in glass manufacturing.

詳細を表示する

Foodstuffs - temperature measurement

Constant temperature monitoring for the quality assurance is a must for monitoring production processes, foodstuffs storage and the sale of foodstuffs. Non-contact infrared thermometers are particularly ...

詳細を表示する

Glued wood - temperature measurement

After drying and sorting the wood laminates, they are cut to the required length, glued, stacked and pressed afterwards. They are heated using microwaves for the glue drying and the individual glue layers ...

詳細を表示する

Soldering systems - temperature measurement

Metal teeth for saw blades are soldered in soldering machines. In doing so, a fast IR temperature measurement provides exact regulation and prevents mechanical stresses in the saw blade and the danger ...

詳細を表示する

Flat glass - temperature measurement

Temperature plays an important role in the glass industry for many manufacturing and production processes. It is a matter of obtaining precise temperature measurements of transparent (glass) and non-transparent ...

詳細を表示する

Bottle and hollow glass - temperature measurement

Special sensors which are used for permanent temperature monitoring are installed at the individual stations of the glass production line.

詳細を表示する

Paper, packaging industry - temperature measurement

Non-contact IR thermometers from Micro-Epsilon are used for fast and non-contact temperature measurement for the manufacture of paper products, particularly in the areas of coating and drying.

詳細を表示する

Melting furnace – temperature measurement

The non-contact temperature measurement in glass furnaces, melting furnaces and feeders is a more and more frequently used alternative to measurement with thermal elements. Micro-Epsilon provides infrared ...

詳細を表示する

Plaster hardening - temperature measurement

Stationary Micro-Epsilon temperature sensors are used for optimisation of the additives during plaster hardening. Due to the constant temperature monitoring of the hardening reaction, defects can be detected ...

詳細を表示する

Steel production and processing - temperature measurement

Infrared thermometers from Micro-Epsilon are used for almost every production stage in the manufacture of steel and aluminium. The precision pyrometers from Micro-Epsilon are used in order to obtain reliable ...

詳細を表示する

Extrusion - temperature measurement

Precise temperature measurement at several places is necessary for extrusion: after preheating the bolt, for the discharge of the profile from the die and for quenching the extruded product. An additional ...

詳細を表示する

Glass drop measurement - temperature measurement

The use of non-contact temperature measurement equipment is required for measuring the glass drop temperature. Pyrometers from Micro-Epsilon are particularly suitable due to the fast operating processes.

詳細を表示する

Hardening – temperature measurement

In order to manufacture constant high quality products, the temperature of the workpieces must be precisely measured during the hardening. Non-contact infrared sensors from Micro-Epsilon are suitable for ...

詳細を表示する

Cooling process - temperature measurement

After pressing, the heated metal object is subjected to the cooling process. In order to guarantee a high quality finished product, a controlled cooling rate is necessary. Non-contact thermometers from ...

詳細を表示する

Tunnel kiln - temperature measurement

The use of precision pyrometers is indispensable for optimum furnace regulation in order to measure the exact internal temperature. The Micro-Epsilon temperature sensors have successfully proven themselves ...

詳細を表示する

Glass pretensioning - temperature measurement

CTlaserGLASS has been specially developed for applications in the glass processing industry, in particular for glass bending, forming and hardening processes. The non-contact thermometer ensures precise ...

詳細を表示する
お問い合わせ
SENTEC Co. Ltd

+81 6 6304 8858

お問い合わせ

Sankyo International Corp.

+81 3 3662 8100

お問い合わせ

Sankyo International Corp.
No. 9-14, Nihonbashi-Yokoyamacho,
Chuo-Ku, Tokyo 103-0003 Japan
sales@sankyointernational.co.jp
+81 3 3662 8100
+81 3 3662 8050