Dimensions, tolerances, sorting, part recognition

車体内のシートエッジにおけるインラインでのバリ測定

塗装プロセスにおいて、後の腐食を防止するための継続的かつエラーフリーの腐食保護は不可欠です。バリに塗布された塗料の厚さの測定は非常に困難であるため、製造プロセスの早い段階で、それも腐食保護やその他の塗料を塗布する前に、バリを検知し取り除くことは決定的な利点をもたらします。ランダムによる点検が可能な固定式ソリューションと異なり、マイクロエプシロンは ...

Show details

Measuring the base height of filters in the automotive industry

In automotive filter production, faultless workmanship is essential for the proper functioning of the filter. In addition, the specified height of the filter is also critical in order to prevent any damage ...

Show details

Thickness and volume measurement of potato slices

When producing potato crisps, factors such as consistency, quality and taste depend to a significant degree on the thickness of the potato slices used. Depending on the process parameters and the condition ...

Show details

接着フィルムの表面検査

産業界における接着フィルムの使用はますます高まっていますが、フィルムの製造時に溝やしわが発生したためフィルムそのものが使えなくなることも稀ではないため、完璧なフィルム表面を求めるクライアントからの要求も高まっています。scanCONTROL ...

Show details

Expansion

A desired or undesired expansion of an object is always combined with a temperature change. This can already start or prevent a minimum expansion process. Several product groups are available for monitoring ...

Show details

抄紙機のカレンダーでのウェブエッジ(紙匹端部)検知

カレンダーは紙の製造時に使用され、最終製品での表面の滑らかさを高めます。ロール状態の紙を正しくガイドするには、正確なエッジ測定が欠かせません。これには、ロールのエッジ位置を高い精度で機械の制御に直接伝達するマイクロエプシロン製レーザーラインセンサが使用されています。このエッジ位置を測定することで同時にロールの幅も測定でき、センサがその測定情報を次のトリミングプロセスに送信します。

Show details

Damage prevention during production of locking cylinder

The company Aumat (Germany) develops and produces complex production systems for locking cylinders. In order to prevent any damage occurring, the operator must feed the correct blank into the production ...

Show details

Automated board measurements in wood production

Electronic Wood Systems GmbH (EWS) has launched the "dimension scan"a new approach to the automated measurement of finished boards. The market leader in measurement systems for the wood processing ...

Show details

Fluid level measurement of aluminium pig irons

A German manufacturer of prestressed concrete products uses a number of 3D measurement systems by InSystems Automation with optical sensors made by Micro-Epsilon for quality control of railway sleepers. ...

Show details

Reliable quality control in the rolling mill

One of the profile rolling mills processes profile steel in reversing operation. The rod centre is then measured and evaluated using a  optoNCDT 1700-750BL.    

Show details

Dimensional accuracy of sectional doors

With sectional doors for parquet or laminate flooring, key and slot joints for individual sections are applied. However, these sections are opened and closed frequently. To enable a robust but permanent ...

Show details

Digital 3D measurement of complex parts and shapes

Mabotic devepols and manufactures various designs of digital scanning units. scanCONTROL laser scanner are often used for digitisation of parts. The scanner projects a laser line onto the object being ...

Show details

Measuring the height of concrete blocks

For the final inspection during the production of concrete blocks, a special test bench records the height of the blocks over a number of tracks. On each track, an optoNCDT 1750 laser sensor measure vertically ...

Show details

Cutting edge measurement

Carbide specialist company Ceratizit uses a semi-automatic measuring machine for production control. This device checks cutting plates for dimensional stability. The cutting plates are moved horizontally ...

Show details

Draw-wire displacement sensors take measurements in pipe trade

In the piping industry orders are placed for fixed lengths of a certain type of pipe. The available pipes with different lengths are transported from the stores to a measurement table to process the order. ...

Show details

Measurement system for cut packaging pieces

Manufacturers in the packaging industry make high demands with regard to their production quality. For sampling inspection for example, the cut pieces of packaging are extracted from the production, placed ...

Show details

An automatic measurement system ensures the production quality of tablets

High performance pill presses are fitted with quickly interchangeable matrix disk units in order to minimize cleaning and setting up times when employing press tools. In automated production a high level ...

Show details

High precision measurement of special profile sections in the production line

In the factory research department a fully automatic system for optical geometry measurement has been developed, constructed and integrated into a production line for lift profile rail sections. The system ...

Show details

Gap measurement in photovoltaic modules

The module is hermetically sealed using a vacuum during a new method for the production of photovoltaic modules. The correct distance between glass front and metal rear side is important for this vacuum. ...

Show details

Inspection of sockets

There are many uses of sockets in the automotive area. The dimensionCONTROL system is used for the quality inspection of these parts. An optical micrometer at the machine entry checks the size of the sockets. ...

Show details

Vibration measurement on carbon brushes

Many direct current electric motors operate with carbon brushes for the current transmission. optoNCDT laser sensors are used to monitor the vibration during operation. They measure the carbon brushes ...

Show details

Monitoring the thermal expansion of pipelines

Pipelines in power stations are stressed to their limits by pressure and temperature. These loads result in movements of the pipes which can be up to 1 metre. Constant supports compensate for the movements ...

Show details

高精度なパイプ測定

パイプや接続金具、スリーブの点検を行う特殊検査システムの中では、これらをランダムサンプリングで選び寸法精度を検査します。プレート上に取り付けられた ...

Show details

Dimension inspection of cylindrical objects

The CD Express measuring instrument developed by a British company measures circumference, diameter and ovality of cylindrically shaped objects. The measuring objects are inserted in the measuring device ...

Show details

座標測定装置

座標測定装置は色々なコンポーネントの計測に使用され、様々なスキャナや測定装置がコンポーネントの表面を 3D で捉えます。これにはレーザーラインスキャナが理想的であり、三角測量の原理に基づいて非接触によりマイクロメーターまで正確にコンポーネントの実表面を測定します。

Show details

Thermal expansion of milling spindles

Accuracies of a few micrometres must increasingly more often be achieved for the parts machining using machine tools. In doing so, the heat development during the machining and in the tool holder is not ...

Show details

アルミニウム製リムの寸法

アルミニウム製リムの製造では、その後の使用時に求められるスムーズな動きが保証できるように、最高度の品質が要求されます。これには scanCONTROL ...

Show details

Softcalender - temperature measurement

Pyrometers from Micro-Epsilon enable the monitoring of fast rotating objects such as, e.g. softcalenders for paper manufacture. The system permanently monitors the fast rotating rolls.

Show details
お問い合わせ
SENTEC Co. Ltd

+81 6 6304 8858

お問い合わせ

Sankyo International Corp.

+81 3 3662 8100

お問い合わせ

Sankyo International Corp.
No. 9-14, Nihonbashi-Yokoyamacho,
Chuo-Ku, Tokyo 103-0003 Japan
sales@sankyointernational.co.jp
+81 3 3662 8100
+81 3 3662 8050